HDS2.1 and HDS3.1 Release

Posted by SoundQubed on 9/30/2016 to Product News
HDS2.1 and HDS3.1 Release
With time comes change and with change comes innovation! We are happy to announce some big upgrades to our HDS200 and HDS300 line-ups.

The New HDS200's will be aptly renamed HDS200.1. They will now feature a green double stitched surround, a larger spider at 199mm compared to the old 181mm.The HDS2.1 now showcases a conical motor with a bumped t-yoke, this is to avoid any bottoming out of the voice coil due to the larger spider. It also boast two ferrite magnets coming in at 156mmX25mm x2 or 6.14"X2" in American units. Don't worry we didn't forget the mounting depth, we know this is a key component for most when deciding what they can run. The new HDS2.1's feature a starting mounting depth of only 6" for the HDS2.110 (a .5" savings) and up to 7.5" for the HDS2.115 (No change).


HDS2.1 Features Include: 

  Green double stitched EROM surround.

  Stamped powder coated frame.

  Vented back-plate for optimal cooling and less turbulence in the coil gap. 

  2.5" diameter four-layer copper coil.

  Conical back plate to allow more voice coil travel.

  Heavy Duty push connectors for ease of install. (Accepts up to 10awg speaker wire).

  Black electroplated top and bottom plates.

  Non-pressed, fiber added cone for maximum rigidity. 

  Power Handling 600W RMS, 1200W Peak.

Available in Dual 2 and Dual 4 ohm configuration.




    


The New HDS300's will be aptly renamed HDS300.1. They too will feature a green double stitched surround replacing the previous white one. The motor is constructed of two ferrite slugs at 190mmX25mm or 7.5"x2" and features a bumped t-yoke to allow for more travel. The new HDS3.1's feature a starting mounting depth of only 7.4" for the HDS3.110 8.7" for the HDS3.115. The new motor hosts a new powder-coated stamped frame to help tidy up the line and comes with a 199mm three piece spider system that is a bit softer to allow for lower tuning and better performance.

HDS3.1 Features Include: 

  Green double stitched EROM surround.

  Stamped powder coated frame.

  Vented back-plate for optimal cooling and less turbulence in the coil gap. 

  3.0" diameter four-layer copper coil.

  Conical back plate to allow more voice coil travel.

  Heavy Duty push connectors for ease of install. (Accepts up to 10awg speaker wire).

  Black electroplated top and bottom plates.

  Non-pressed cone for maximum rigidity. 

  Power Handling 1200W RMS, 2400W Peak.

Available in Dual 2 and Dual 4 ohm configuration.

Header

12 Comments

Mark Ancarrow
Date: 10/7/2016
What are the prices gonna be
SoundQubed
Date: 10/10/2016
Mark, The prices on the HDS2.1 & HDS3.1 will be the same as the older models.
Kevin wright
Date: 10/23/2016
Are they available yet because if I it I'm gonna want the hds3.1 15s
Joe
Date: 11/16/2016
Will there be an 18'' in the hds3.1 finally?
Joseph
Date: 11/25/2016
Will the new hds3.1have more xmax and lower fs then the older version ?? Thanks
Zach
Date: 1/27/2017
Just curious as to why the old basket style was ditched and replaced with this one. The old basket looked way more extreme. Made doing plexi glass and what not something worth working on.
Zach
Date: 1/27/2017
Just curious as to why the old basket style was ditched and replaced with this one. The old basket looked way more extreme. Made doing plexi glass and what not something worth working on.
Doug
Date: 3/21/2017
When will the hds3.1 be available for purchase. Waiting for it to drop so I can start my build
Doug
Date: 3/21/2017
When will the hds3.1 be available for purchase. Waiting for it to drop so I can start my build
Doug
Date: 3/21/2017
When will the hds3.1 be available for purchase. Waiting for it to drop so I can start my build and will It be available in a 12 inch
Donny
Date: 5/20/2017
I see they are now out in stock, but the pages on your site for these are missing most of the specs! Can we get an update on that?
Donny
Date: 5/20/2017
out for sale and in stock*

Add Comment