Your Price: $165.00
Part Number:HDS3.110

Choose Options

Impedance ( Available in Dual 2 and Dual 4 ohm Coils) help
8" Hexagonal Carbon Fiber Dustcap
8" Hexagonal Carbon Fiber Dustcap [+$59.00]

The New HDS300.110 is here! Featuring a green double stitched surround replacing the previous white one. The motor is constructed of two ferrite slugs at 190mmX25mm or 7.5"x2" and features a bumped t-yoke to allow for more travel. The new motor hosts a powder-coated stamped frame to help tidy up the line and comes with a 199mm three piece spider system that is a bit softer to allow for lower tuning and better performance. The HDS3.1 is bigger, better and badder than the HDS3.1 even with a shallower mount. The HDS3.1 line can be utilized in any DIY install including sealed, ported, and bandpass installs.

HDS3.1 Features Include: 

  Green double stitched EROM surround.

  Stamped powder coated frame.

  Vented back-plate for optimal cooling and less turbulence in the coil gap. 

  3.0" diameter four-layer copper coil.

  Conical back plate to allow more voice coil travel.

  Black electroplated top and bottom plates.

  Non-pressed cone for maximum rigidity. 

  Power Handling 1200W RMS, 2400W Peak.

Model HDS3.110
Woofer Size 10"
F(s) 37 Hz
7.67 Ohms
93.81 Ohms
Q(ms) 6.869
Q(ts) 0.561
V(as) 8.328 liters 
L(e) 0.851 mH
n(0) 0.13 %
235.7 grams
0.05 mm/N
Sensitivity 1W/1m 83.24
Xmax (Peak to Peak) 29mm
Magnet Weight 160oz
Coil Diameter 3.0"
Coil Length 40mm
Usable Throw 28mm
RMS Power 1200W
Peak Power 2400W
Mounting Depth 6.5"
Circle Cutout 9.31"
Enclosure Width
PLEASE READ: In the pursuit of offering the best in DIY car Audio we ask that you read about clipping, what causes it and what the outcome is. 
5 Stars
This sub is power hungry. I first ran it with a old school ppi 500iqx pushing 700w to it and it wasn't enough. So now I have a CT Sound amp pushing 1500w and it is just about right. Custom built box tuned at 32hz and it sounds good. Great price and great sound can't beat it.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from Skagit County. on 5/30/2017
5 Stars
Hi guys don't write reviews but here goes, I have two of these and a single 15 running in sealed enclosures for Sq setup the 10"s are tuned at 110 Hz down to 50 Hz and the 15" from 50 down and they run off Alpine Pdx M12 amps 1200 wrms at 4 ohm loads and I am extremely impressed as they run in more the response is getting heaps snappier and deep lows. Has totally blown away any subs I have had before totally recommend but they need power lol 😁
Did you find this helpful?  1 of 2 Found Helpful
Reviewed by:  from Safety Bay. on 7/17/2017
5 Stars
It's the best subwoofer I have ever owned
Did you find this helpful?  1 of 2 Found Helpful
Reviewed by:  from Dallas. on 7/15/2017
5 Stars
After the first month I wouldn't change a thing. Two dual 4 ohm, box tuned to 35hz, brx2400D and SNI-35 LOC. I've owned hdc-12's and 15's. I work with other brands daily with builds at the shop and these two 10's are far superior. I'm going to give it about three or four months before upgrading LOC and wiring down. Couldn't be happier with these subs already, and I know they'll only get better with time. 7394g6560
Did you find this helpful? 
Reviewed by:  from Arizona. on 10/4/2017

Reward Points

160 points will be rewarded to you when you buy this item.

Recently Viewed Items