Q1-2200.2 Monoblock Amplifier

  • Dimensions
  • External Fuse Rating
  • Input Sensitivity
  • Low Pass Filter
  • Power @ 12V @ 1% THD (4 ohm)
  • Power @ 14.4V @ 1% THD (1 ohm)
  • Power @ 16V @ 1% THD (1 ohm)
  • Power, Strapped @ 14.4V @ 1% THD (2 ohm)
  • Signal/Noise Ratio
  • Subsonic Crossover Range
  • Channels

398.00 398.00 398.0 USD

398.00

Option not available

This combination does not exist.

Add to Cart

Dimensions: 17.71 x 9.27 x 2.35 inches
External Fuse Rating: 200 Amps
Input Sensitivity: 8 V - 0.2 V
Low Pass Filter: 20 Hz - 200 Hz
Power @ 12V @ 1% THD (4 ohm) : 770 Watts RMS
Power @ 14.4V @ 1% THD (1 ohm): 2300 Watts RMS
Power @ 16V @ 1% THD (1 ohm): 2450 Watts RMS
Power, Strapped @ 14.4V @ 1% THD (2 ohm): 4600 Watts RMS
Signal/Noise Ratio: 90 dB
Subsonic Crossover Range: 10 Hz - 50 Hz
Channels: 1


Two-year manufacturer defect warranty.
Free Shipping in U.S.

DISCLAIMER:  THIS AMPLIFIER WILL REQUIRE AN ADDITIONAL CHARGING SYSTEM TO RUN PROFICIENTLY. IT WILL RUN WITHOUT THE ADDITIONAL CHARGING SYSTEM, BUT YOU RUN THE CHANCE OF DAMAGING THE AMPLIFIER AND/OR NOT GETTING THE MAXIMUM POWER OUT OF IT. THE ADDITIONAL CHARGING SYSTEM INCLUDES THE BIG 3 UPGRADE AS WELL AS ADDING AN AGM OR LITHIUM CAR AUDIO BATTERY. ALL OF OUR AMPLIFIERS ARE AGE TESTED FOR AN HOUR BEFORE GOING INTO STOCK.


Our Q1-2200.2 amplifier is the BIG BROTHER TO THE Q1-1200D with the same great design features but with more of the power producing GOOD STUFF to give you 2200 watts of CLEAN UNCLIPPED POWER @ 1% THD.The Q1-2200D is the perfect match for a pair of our HDS3 series subwoofers in a Daily Driver Application. If you want to do a little showing off or burping at competitions use a single Q1-2200.2 per HDX sub.Now if you are a “HARDCORE COMPETITOR” and want to really push those HDX3’s link a pair of the Q1-2200.2’s to a single HDX3 or any other subwoofer of your choice for competition and you’re in for some fun and maybe some smoke from your subs if you’re not careful. If you burn a coil or fold a cone don’t say we didn’t warn you. (We do not warranty burnt or open coils or competition use of subwoofers and amplifiers)


DESIGN FEATURES


The Q1-2200.2 is fully stable down to one ohm.

Daisy Chain connection of two Q1-2200.2’s stable down to two ohms

Four way protection circuits: Speaker shorts, DC offset, High/Low voltage, Thermal protection

High current MOSFET switching devices

24db/oct slope crossovers, Fully adjustable Low Pass Filter and Subsonic Filter

Remote Gain Knob Included